Fuel Specifications For everything you need to know about the high-quality composition of blends, please refer to the information below.   Our High-Grade Castor Ultimate in lubrication protection and performance. Fortified Film Strength and Anti-Scruff protection. Extreme Load Carrying Capacity engineered to eliminate engine wear. Clean BurnTM Technology reduces carbon and residue build-up. De-gummed formula reduces ring sticking. Contains familiar Klotz Red for easy mixing and castor racy odor. Contains seal conditioners and preservatives. Smoke Rating:   4-5 (1=fog; 10=no smoke) Clean BurnTM:   5 (1=heavy deposits; 10=no carbon) Film Strength:   10 (1=failure; 10=virtually no wear) Vicosity @ 100o F:   950-1100 SUS 50W @40o C: 220 cSt Pour Point:   0o F Flash Point:   520o F RPM Limit:   Unlimited Rust Prevention:   Contain rust inhibitors. Not recommended as a storage lubricant. Certification:   A.P.I. S.A. Intended for Racing Engines Only Color:   Red             High-Viscosity Klotz Synthetic Oils TechniPlate Peak Film Strength and Anti-Scuff protection. Extreme Load Carrying Capacity engineered to reduce engine wear. Clean BurnTM Technology reduces carbon and residue build-up. Contains familiar Klotz Red for easy mixing and castor racy odor. Smoke Rating:   10 (1=fog; 10=no smoke) Clean BurnTM:   10 (1=heavy deposits; 10=no carbon) Film Strength:   7.5 (1=failure; 10=virtually no wear) Vicosity @ 100o F:   950 SUS 50W @40o C: 200 cSt Pour Point:   -15o F Flash Point:   460o F RPM Limit:   12-13,000; R/C Model 20,000+ Rust Prevention:   Contain rust inhibitors. Not recommended as a storage lubricant. Certification:   A.P.I. S.A. Intended for Racing Engines Only Color:   Red             Low-Viscosity Klotz Heliglow Synthetic Oils Reduced Friction and Improved Performance TechniPlate Peak Film Strength and Anti-Scuff protection. Extreme Load Carrying Capacity engineered to reduce engine wear. Clean BurnTM Technology reduces carbon and residue build-up. Contains familiar Klotz Red for easy mixing and castor racy odor. Less Drag... More Power® Smoke Rating:   10 (1=fog; 10=no smoke) Clean BurnTM:   10 (1=heavy deposits; 10=no carbon) Film Strength:   7.5 (1=failure; 10=virtually no wear) Vicosity @ 100o F:   420 SUS 5W @40o C: 75 cSt Pour Point:   -25o F Flash Point:   420o F RPM Limit:   20,000+ Rust Prevention:   Contain rust inhibitors. Not recommended as a storage lubricant. Certification:   A.P.I. S.A. Intended for Racing Engines Only Color:   Red             XP-7 Additive  blends contain XP-7, a special fuel additive proven to reduce heat. Our testing shows a major reduction in head temperatures when using XP-7. Less heat means longer engine life and smoother runs. XP-7 Fuel Additive Test Results TIME TEMP USING ALL SYNTHETIC TEMP USING SYNTHETIC/ CASTOR TEMP USING XP-7 2 minutes 200 degrees 200 degrees 155 degrees 3 minutes 210 degrees 205 degrees 165 degrees 4 minutes 212 degrees 207 degrees 165 degrees 5 minutes 213 degrees 207 degrees 165 degrees 6 minutes 218 degrees 210 degrees 168 degrees 7 minutes 247 degrees 225 degrees 168 degrees 8.75 minutes (fuel gone) 270 degrees 225 degrees 170 degrees Test was performed using XP 2005 fuel on an Irvine .40 ABC R/C engine which was flushed and cleaned between tests.

XP Fuel Is Distributed Exclusively By Hiflight R/C Ltd. Copyright © 2006-2008 Hiflight R/C Ltd. All Rights Reserved. Dealer inquiries welcome.